Category- Residential

This is very popular type of Indoor unit, It installed on wall generally 7 feet from ground. It available from 0.8 ton to 3 ton capacity.

Category- Commercial

This is very popular in premium commercial area like showrooms, lobbies, corporate office floor sect. It installed between true ceiling & false ceiling, available in 2 sizes 2 feet x 2 feet from 0.6 ton to 2 ton & 3 feet x 3 feet from 0.6 ton to 4.5 ton. Also options available of 4 way air discharge & round flow air discharge.

Category- Commercial

Very widely used in commercial places like work station area or where customized ceiling is required, generally installed above false ceiling with ducting at desired location so that from below false ceiling one can see grills or diffuser etc. Capacity available from 1.5 ton to 16.5 ton in standard & customization also possible.

Category- Commercial

Ceiling mounted 1 way air flow with compact and lightweight body perfect for limited ceiling space applications available in 1 ton to 1.5 ton.

Category- Commercial/Industrial

UNITS This is ductable type indoor unit, it available standerd capacity 1.5 tr to 18 tr. Customised AHU can be design as per site requirement such as Tonnage / size / floor or ceiling mounting / CFM / Top or side discharge etc.

Category- Commercial

This is Top discharge VRF units, generally available range from 6 HP to 26 HP (may vary from company to company). It comes with heating / cooling option. Sizes also vary depend upon HP capacity. It requires 3 Phase power supply.

Category- Commercial/Industrial

Movement of refrigerant from evaporative unit to condenser unit taken care by these pipes, type of pipes depend upon refrigerant generally copper used.

Category- Commercial/Industrial

These are accessories used installed at the frontend side of the system can be used for supply as well as return air of the system, there are number of verity available and one can select depend upon budget & requirements.

Category- Commercial/Industrial

Type of duct.

Category- Commercial/Industrial

This is sort of refrigerant distribution box. In plays as bridge from 1 ODU to many IDU.

Category- Commercial/Industrial

This is decorative item generally used in doors, walls where exchange of air needed.

Category- Commercial/Industrial

Is used to support / protect copper piping.

Category- Commercial/Industrial

Air to the room in an individually regulated, precisely dosed manner. The objective is to obtain the best possible air distribution in the occupied zone, and stable, homogeneous ambient temperatures. Regardless of whether inductive, displacement, or procondive ventilation is required, It available in many types & shapes.

Category- Commercial/Industrial

Ducts are conduits or passages used in heating, ventilation, and air conditioning (HVAC) to deliver and or remove air.

Category- Commercial/Industrial

This is installed between two metal connectors to minimize noise and vibrations.

Category- Commercial/Industrial

Acoustic Duct Liner is easy to install in HVAC ductwork and plenums to reduce fan and other airborne noises.

Category- Commercial/Industrial

An actuator is a component of a machine that is responsible for moving and controlling a mechanism or system, for example by opening a valve.

Category- Commercial/Industrial

Smoke dampers are driven by a motor, referred to as an actuator. A probe connected to the motor is installed in the run of the duct and detects smoke, either in the air which has been extracted from or is being supplied to a room, or elsewhere within the run of the duct. Once smoke is detected, the actuator will automatically close the smoke damper until it is manually re-opened. Fire dampers can be found in the same places as smoke dampers, depending on the application of the area after the firewall. Unlike smoke dampers, they are not triggered by any electrical system (which is an advantage in case of an electrical failure where the smoke dampers would fail to close).

Category- Commercial/Industrial

Ducting systems must often provide a method of adjusting the volume of air flow to various parts of the system.

Category- Commercial/Industrial

Insulation is a material which plays vital roll in performance of HVAC system, Two major types are Thermal & Acoustic insulation. Thermal insulation reduces heating and or cooling loss plus avoid condensation may happen due to temperature difference of substance travelling through & ambient temperature & Acoustic helps to reduce noise level. These are available in many sizes and can be used as per requirements.

Category- Commercial

Is a device that cools air through the evaporation of water. Evaporative cooling uses the fact that water will absorb a relatively large amount of heat in order to evaporate The temperature of dry air can be dropped significantly through the phase transition of liquid water to water vapor. This can cool air using much less energy than refrigeration. In extremely dry climates, evaporative cooling of air has the added benefit of conditioning the air with more moisture for the comfort of building occupants.This available standard for up to 300 sq feet & can be customized as per industrial / commercial requirement.

Category- Commercial

Roof exhaust fan is suitable for the removal of relatively clean air from buildings. Typical applications include kitchen exhaust, laboratory fume exhaust and commercial / industrial building ventilation. Available in many sizes & types.

Category- Commercial/Industrial

Direct in-line connection with industrial circular ducting of standard diameter.Suitable for applications in residential, commercial and industrial exhaust and supply ventilation such as bathrooms, kitchens, offices, factories, shops, bars, gymnasiums, restaurants etc.Complete range of inlet and outlet diameters to allow installations in most standard sizes of commercial ducts.The motor and impeller assembly are suitable for operation at any angle and deliver exceptional airflow performances.

Category- Commercial/Industrial

Air Curtains are the perfect way to provide your premises with a comfortable, clean and hygienic environment while saving energy with efficient and powerful operation. An air curtain spouts air flow to balance the pressures generated by the difference in temperatures, thus preventing either the ingressing or escaping of heat. Therefore, it is necessary to select the model that suits the difference of temperatures and the shut-out distance. It also prevents insects to enter the room.

Category- Commercial/Industrial

Automation or automatic control is the use of various control systems for operating equipment at its optimum level, inshort to save power & extract maximum from HVAC system.

Electrical cables required for two purposes one is communication cable & other is power supply cable, the core & thickness is depend upon capacity of HVAC unit.

A control panel is a flat, often vertical, area where control or monitoring HVAC instruments are displayed or it is an enclosed unit that is the part of a system that users can access. Generally sequential controllers, temperature, humidity, airflow, air quantity, etc are controlled observed monitored etc.